Info: '7. Press the "Load/Eject" button to charge the ink in the printer. Do not turn off the power until the power light stops flashing.'
DITL_-15501_select adjustment category.txt
Items: (16 entries)
0:
Bounds: x1=275, y1=235, x2=345, y2=255
Type: 4
Info: 'Next >'
1:
Bounds: x1=165, y1=235, x2=235, y2=255
Type: 4
Info: 'Cancel'
2:
Bounds: x1=270, y1=230, x2=350, y2=260
Type: -128
Info: ''
3:
Bounds: x1=5, y1=7, x2=64, y2=23
Type: -64
Info: '√t'
4:
Bounds: x1=5, y1=30, x2=395, y2=33
Type: -64
Info: '√s'
5:
Bounds: x1=315, y1=17, x2=395, y2=30
Type: -128
Info: ''
6:
Bounds: x1=30, y1=50, x2=370, y2=130
Type: -120
Info: 'Look at the printed, alignment sheet (A).If any of the printed patterns do not match the correct patterns shown below, click the number of the pattern(s) that does not match. If all patterns match, click "Cancel".'
7:
Bounds: x1=30, y1=280, x2=132, y2=297
Type: -120
Info: ''
8:
Bounds: x1=75, y1=155, x2=91, y2=171
Type: -128
Info: ''
9:
Bounds: x1=105, y1=155, x2=155, y2=171
Type: 5
Info: ''
10:
Bounds: x1=75, y1=180, x2=91, y2=196
Type: -128
Info: ''
11:
Bounds: x1=105, y1=180, x2=155, y2=196
Type: 5
Info: ''
12:
Bounds: x1=245, y1=155, x2=261, y2=171
Type: -128
Info: ''
13:
Bounds: x1=275, y1=155, x2=325, y2=171
Type: 5
Info: ''
14:
Bounds: x1=245, y1=180, x2=261, y2=196
Type: -128
Info: ''
15:
Bounds: x1=275, y1=180, x2=325, y2=196
Type: 5
Info: ''
DITL_-15502_confirm sheet for adjustment.txt
Items: (16 entries)
0:
Bounds: x1=275, y1=235, x2=345, y2=255
Type: 4
Info: 'Next >'
1:
Bounds: x1=165, y1=235, x2=235, y2=255
Type: 4
Info: 'Cancel'
2:
Bounds: x1=270, y1=230, x2=350, y2=260
Type: -128
Info: ''
3:
Bounds: x1=5, y1=7, x2=64, y2=23
Type: -64
Info: '√t'
4:
Bounds: x1=5, y1=30, x2=395, y2=33
Type: -64
Info: '√s'
5:
Bounds: x1=315, y1=17, x2=395, y2=30
Type: -128
Info: ''
6:
Bounds: x1=55, y1=235, x2=125, y2=255
Type: 4
Info: '< Back'
7:
Bounds: x1=35, y1=50, x2=365, y2=115
Type: -120
Info: 'The printer will print alignment sheet (B) for the following pattern(s). Make sure A4 or letter size paper is loaded in the printer.Click "Next" when ready.'